Su carrito de compras está vacío
 
English Polski Spanish 
Buscar un manual
 

(p.Ej. AA-V20EG JVC, ZX-7 Sony)
PayPal 1000+ rating Secure, Encrypted Checkout.
 
Usuarios conectados
Actualmente hay 5634 visitantes y 
1 usuarios online.
Productos
Información
Destacado
Inicio >> SHARP >> XLMP110H Manual de Servicio
 
 0 artículo(s) en Su carrito 

SHARP XLMP110H
Manual de Servicio


¡Twitee acerca de este producto y obtenga $1.00 de crédito en la tienda para uso!
  • Contiene diagramas del circuito
  • Descargable
  • Formato PDF
  • Manual completo
  • Idiomas: English
Precio: $4.99

Descripción del SHARP XLMP110H Manual de Servicio

Manual de servicio completo en formato digital (archivo PDF). Los manuales de servicio por lo general contienen diagramas de circuitos, tarjetas de circuitos impresos, consejos para reparación, diagramas de cableado, diagramas de bloque y lista de refacciones. El Manual de Servicio (a veces llamado Manual de Reparación) es usado principalmente por los técnicos.

Si tan solo quiere saber cómo utilizar su televisión, reproductor de vídeo, reproductor de mp3, etc. Quizá lo que necesita es el Manual del Propietario. Después de colocar la orden le enviaremos las instrucciones de descarga a su dirección de e-mail.

The manual is available in languages:

Not yet ready
You must purchase it first

Opiniones de los clientes
No hay comentarios de productos.

TEXT_PDF_SNIPPET
XL-MP110H/MP110E
2. CD MECHANISM SECTION
Perform steps 1 to 3, 14 of the disassembly method to remove the CD mechanism.(see page 3-3,3-4)
Stop Washer (A3) x1 Optical Pickup CD Mechanism (A1) x2 ø2.6 x5mm

2.1. How to remove the Optical Pickup (See Fig. 1)
1. Remove the screws (A1) x 2 pcs and shaft (A2) x 1 pc. 2. Remove the stop washer (A3) x 1 pc and gear (A4) x 1 pc. 3. Remove the optical pickup. NOTE: After pulling out the optical pickup connector, wrap the tip of it with conductive aluminium foil or the like to protect the optical pickup from the static electricity.

Shaft (A2) x1 Gear (A4) x1

2.2. How to remove CD Disc (See Fig. 2~6)
1. When CD is at play position, rotate reduction gear C clock-wise as shown in Figure 2 until disk tray is at �STOCK� position, then rotate the gear further to eject the disk tray (Figure 6) so that CD can be removed from the tray. 2. In another case, if CD mechanism is at tray No. 1 play position and to remove CD located in tray No. 3, the procedure is as follows: If the gear up down board is located at tray No. 1 position, then rotate Reduction gear C clock-wise until Disc tray is at �STOCK� position. Rotate reduction gear D clock-wise (Figure 3) to move the CD mechanism to tray No. 3 position. This is confirmed by checking the gear up down board position base on the marking as indicated on the main chassis as shown in Figure 4. � Usually changer is covered with top plate. As for reference purpose, we exclude the top plate for easy viewing. (Figure 5,6)

Figure 1

Reduction gear C

Front

Rear

Figure 2
Disc Tray Guide Tray CD Disc

Reduction gear D

Up
CD At 'PLAY' position. CD Disc

Down

Figure 3

Gear up down board
CD At 'STOCK' position.

Figure 5
CD Disc

Mark 1 Mark 3 Mark 5 (DISC 1) (DISC 3) (DISC 5) Mark 2 Mark 4 (DISC 2) (DISC 4)
Remove CD from tray. Tray eject

Figure 4 Figure 6

3�2

Quizás también quiera comprar

$4.99

XL-MP110H SHARP
Manual de Usuario

Manual del propietario completo en formato digital. El manual estará disponible para descarga como …
>
Parse Time: 0.291 - Number of Queries: 99 - Query Time: 0.083