SHARP VC-GH61GM
Manual de Usuario

TINS-A083UMZZEnglish.book Page 16 Monday, November 11, 2002 9:39 AM

ADVANCED OPERATION

AUDIO AND YOUR VCR
HI-FI STEREO SOUND
Stereo sound is possible from this VCR if you have a stereo TV connected to the VCR with a scart lead, or audio equipment connected with audio phono leads. The VCR is normally set so that stereo sound is possible. The sound output from the VCR is controlled by the

AUDIO OUT button on the remote control. If you wish to change the sound output you can use the AUDIO OUT button as follows:
� � � � Press AUDIO OUT once. The LEFT audio channel will be sent to BOTH speakers. L will appear on the VCR display. Press AUDIO OUT twice. The RIGHT audio channel will be sent to BOTH speakers. R will appear on the VCR display. Press AUDIO OUT three times. The MONO track will be sent to BOTH speakers. L and R will disappear from the VCR display. Pressing AUDIO OUT a fourth time, normal Hi-Fi stereo sound will be heard. L and R will appear on the VCR display.

IGR Hi-Fi STEREO SOUND
Your VCR can receive and record IGR sound. The VCR is normally set so that IGR sound is possible if it is present on the receiving signal, otherwise the VCR will automatically switch to receive the mono signal.

NOTES:
� � � � If the tape being played back does not carry sound recorded on Hi-Fi tracks, L and R will not appear on the display. lf the sound contains �crackling� or �popping� noises the sound quality may be improved by adjusting the tracking using CHANNEL K/L . If the poor quality is for a long period the VCR will automatically select the mono track and the sound will be in mono. Not all TV transmitters provide IGR sound. In this case the VCR automatically switches to receive the mono signal.

GB-16