Su carrito de compras está vacío
 
English Polski Spanish 
Buscar un manual
 

(p.Ej. AA-V20EG JVC, ZX-7 Sony)
PayPal 1000+ rating Secure, Encrypted Checkout.
 
Usuarios conectados
Actualmente hay 5784 visitantes online.
Productos
Información
Destacado
Inicio >> SHARP >> SF2014 Manual de Servicio
 
 0 artículo(s) en Su carrito 

SHARP SF2014
Manual de Servicio


¡Twitee acerca de este producto y obtenga $1.00 de crédito en la tienda para uso!
  • Contiene diagramas del circuito
  • Descargable
  • Formato PDF
  • Manual completo
  • Idiomas: English
Precio: $4.99

Descripción del SHARP SF2014 Manual de Servicio

Manual de servicio completo en formato digital (archivo PDF). Los manuales de servicio por lo general contienen diagramas de circuitos, tarjetas de circuitos impresos, consejos para reparación, diagramas de cableado, diagramas de bloque y lista de refacciones. El Manual de Servicio (a veces llamado Manual de Reparación) es usado principalmente por los técnicos.

Si tan solo quiere saber cómo utilizar su televisión, reproductor de vídeo, reproductor de mp3, etc. Quizá lo que necesita es el Manual del Propietario. Después de colocar la orden le enviaremos las instrucciones de descarga a su dirección de e-mail.

The manual is available in languages:

Not yet ready
You must purchase it first

Opiniones de los clientes
No hay comentarios de productos.

TEXT_PDF_SNIPPET
3'

4'

(7)
Use a half-tone document and make a 100% copy on B4 or 8 1/2" x 14" paper in the half tone mode.
Make copies at the max. enlargement ratio and the min. enlargement ratio.

Check the uniformity.

Measure the distances between the copy image lead edge and the copy paper lead edge of the max. enlargement copy and the min. enlargement copy, and compare the two.

Is the uniformity OK ?

NO

Change the installing position of the exposure adjustment plate to adjust the uniformity. 0 ± 1.0 mm ?
NO

Change the Sim50-1 set value A so that the difference is within the specified range.

YES Put the scale to the document reference plate and set in the paper transport direction.

YES

5'

Make a 100% copy with Sim50-1. Set the Sim45 set value to "0." Measure the distance between the copy image lead edge and the copy paper lead edge.

Is the SPF installed ?

NO

Change the Sim50-1 set value B so that the difference is within the specified range. (Zoom model) Change the Sim50-1 set value A so that the difference is within the specified range. (Non zoom model)

YES

0 ± 1.0 mm ?

NO

Is it the zoom machine ?

5
YES

6

(8)-a

YES

Set the Sim50-1 set values A and B to "0."

Is the SPF installed ?

NO

Make copies at the max. enlargement ratio and the min. enlargement ratio.

(8)-a
Make a copy on B4 or 8 1/2" x 14" paper at the max. enlargement ratio and the min. reduction ratio in the document table mode.
YES

YES

NO

Set the Sim50-1 set values A, B, and C to "0."

Use the SPF to make a 100% copy.

Measure the distances between the copy image lead edge and the copy paper lead edge of the max. enlargement copy and the min. enlargement copy, and compare the two.

Measure the distance between the copy image lead edge and the paper lead edge of each copy. L1 = Distance in the max. enlargem ent ratio Distance in the min. reduction L2 = ratio

Measure the distance (L3) between the copy image lead edge and the copy paper lead edge. 0 ± 1.0 mm ? Calculate the Sim50-1 set value from the following formula. C8 = 8.0906 x L3 NO

Change the Sim50-1 set value C so that the difference is within the specified range.

(8)-b
Make a 100% copy in the document table mode and check the lead edge

Calculate the Sim50-1 set value from the following formula. A = 8.243 x (L1 - L2) B = 16.0668 x L2 -7.9661 x L1
Set the Sim50-1 set value.

void area. (Document table mode)

0 +3 mm ? -0 Set the Sim50-1 set values A and B. YES
YES

NO

Change the Sim45-1 set value to adjust the void area.

6
YES

Use the SPF to make a 100% copy and check the lead edge void area. (SPF mode)

Is the SPF installed ?

4

NO

Use a black color document and make a 100% copy on the A4 or 8 1/2" x 14" paper

YES
0 +3 mm ? -0

NO

Change the Sim45-1 set value to adjust the end edge void area.

NO

0 +3 mm ? -0

Change the Sim45-1 set value to adjust the lead edge void area.

YES

End

7�5

Quizás también quiera comprar

$4.99

SF-2014 SHARP
Diagrama del circuito

Conjunto de diagramas del circuito. Los diagramas serán proporcionados en un archivo PDF. El archiv…

$4.99

SF2014 SHARP
Manual de Usuario

Manual del propietario completo en formato digital. El manual estará disponible para descarga como …

$4.99

SF-2014 SHARP
Catálogo de piezas

Únicamente Catálogo de Partes. Está disponible en formato PDF. Muy útil si su equipo se ha averi…
>
Parse Time: 0.16 - Number of Queries: 103 - Query Time: 0.047